* Upcoming papers  
 
 
 
 
Subject Keyword Abstract Author
 
 
Categories
Sensor & Actuator Instruments
Design and Simulation of Integral Twist Control for Helicopter Vibration Reduction
Sangjoon Shin, Carlos E. S. Cesnik, and Steven R. Hall
International Journal of Control, Automation, and Systems, vol. 5, no. 1, pp.24-34, 2007
Resonant Loop Design and Performance Test for a Torsional MEMS Accelerometer with Differential Pickoff
Sang Kyung Sung, Chul Hyun*, and Jang Gyu Lee
International Journal of Control, Automation, and Systems, vol. 5, no. 1, pp.35-42, 2007
Minimization of Modeling Error of the Linear Motion System with Voice Coil Actuator
Jin-Dong Hwang, Yong-Kil Kwak, Hong-Jung Jung, Sun-Ho Kim, and Jung-Hwan Ahn
International Journal of Control, Automation, and Systems, vol. 6, no. 1, pp.54-61, 2008
Design of Two-axis Force Sensor for Robot's Finger
Gob-soon Kim
Transaction on Control Automation, and Systems Engineering, vol. 3, no. 1, pp.66-70, 2001
Development of New Methods for Positon Estimation of Ynderground Acoustic Source Using a Passive SONAR System
Soon Suck Harng/Je Hyeong Lee/ Heung Gu Ahn
Transaction on Control Automation, and Systems Engineering, vol. 2, no. 1, pp.69-75, 2001
Measurement Technique for Sea Height of Burst Using Image Recognition
Ju Ho Choi/Sung Soo Hong/Kyu Chang Kang/Joon Lyou
Transaction on Control Automation, and Systems Engineering, vol. 2, no. 1, pp.76-83, 2000
Partial Pole Assignment via Constant Gain Feedback in Two Classes of Frequency-domain Models
Guo-Sheng Wang, Guo-Zhen Yang, and Guang-Ren Duan
International Journal of Control, Automation, and Systems, vol. 5, no. 2, pp.111-116, 2007
Improved Direct Torque Control for Sensorless Matrix Converter Drives with Constant Switching Frequency and Torque Ripple Reduction
Kyo-Beum Lee and Frede Blaabjerg
International Journal of Control, Automation, and Systems, vol. 4, no. 1, pp.113-123, 2006
Environment Modeling for Autonomous Welding Robots
Min Y.Kim/ Hyung Suck Cho/ Jae Hoon Kim
Transaction on Control Automation, and Systems Engineering, vol. 3, no. 2, pp.124-132, 2001
One Idea on a Three Dimensional Measuring System Using Light Intensity Modulation
Ikumatsu Fujimoto, In-Ho Cho, Jeong-Hyeon Pak, and Young-Sik Pyoun
International Journal of Control, Automation, and Systems, vol. 3, no. 1, pp.130-136, 2005
Recognition of Material Temperature Response Using Curve Fitting and Fuzzy Neural Network
Young-Jae Ryoo, Seong-Hwan Kim, Young-Hak Chang/Young-Cheol Lim/ Eui-Sun Kim/Jin-Kyu Park
Transaction on Control Automation, and Systems Engineering, vol. 3, no. 2, pp.133-139, 2001
Improvement of Data Receive Ratio in Remote Water Meter System by Upgrading Sensor
Hiesik Kim and Odgerel Ayurzana
International Journal of Control, Automation, and Systems, vol. 7, no. 1, pp.145-150, 2009
Unknown Parameter Identifier Design of Discrete-Time DC Servo Motor Using Artificial Neural Networks
Dong-Seog Bae / Jang-Myung Lee
Transaction on Control Automation, and Systems Engineering, vol. 2, no. 3, pp.207-213, 2000
A Development of Recoil & Counter Recoil Motion Measurement
Ju-Ho Choi, Sung-Soo Hong, and Joon Lyou
Transaction on Control Automation, and Systems Engineering, vol. 2, no. 3, pp.214-219, 2000
A Segmentation Method for Counting Microbial Cells in Microscopic Image
Hak-Kyeong Kim/Sun-Hee Lee/Myung-Suk Lee/Sang-Bong Kim
Transaction on Control Automation, and Systems Engineering, vol. 4, no. 3, pp.224-230, 2002
Development of a Novel Direct-Drive Tubular Linear Brushless Permanent-Magnet Motor
Won-jong Kim and Bryan C. Murphy
International Journal of Control, Automation, and Systems, vol. 2, no. 3, pp.279-288, 2004
Facial Recognition Algorithm Based on Edge Detection and Discrete Wavelet Transform
Min-hyuk Chang/Mi-Suk Oh/Chun-Whan Lim/ Muhammad Bilal Ahmad/Jong-An Park
Transaction on Control Automation, and Systems Engineering, vol. 3, no. 4, pp.283-288, 2001
A Constrained Recdeing Horizon Estimaator with FIR Structures
Pyung Soo Kim/Young Sam Lee
Transaction on Control Automation, and Systems Engineering, vol. 3, no. 4, pp.289-292, 2001
Visual Precise Measurement of Pile Rebound and Penetration Movement Using a High-Speed Line-Scan Camera
Mee-Seub Lim/Bum-Jae You/Sang-Rok Oh/Song-Soo Han/Sang Hun-Lee
Transaction on Control Automation, and Systems Engineering, vol. 4, no. 4, pp.314-346, 2002
Development of a Six-Axis Force/Moment Sensor with Rectangular Taper Beams for an Intelligent Robot
Gab-Soon Kim
International Journal of Control, Automation, and Systems, vol. 5, no. 4, pp.419-428, 2007
Representation of a Conceptual Design for a Rectilinear Motion Polymer Actuator
Ja Choon Koo, Kwang Mok Jung, Jong Kil Park, Jae Do Nam, Young Kwan Lee, Jae Wook Jeon, and Hyouk Ryeol Choi*
International Journal of Control, Automation, and Systems, vol. 5, no. 4, pp.429-435, 2007
Performance Improvement of a 6-Axis Force-torque Sensor via Novel Electronics and Cross-shaped Double-hole Structure
Chul-Goo Kang
International Journal of Control, Automation, and Systems, vol. 3, no. 3, pp.469-476, 2005
Development and Verification of PZT Actuating Micro Tensile Tester for Optically Functional Materials
Seung-Soo Kim, Hye-Jin Lee*, Hyoung-Wook Lee, Nak-Kyu LeeChang-Soo Han, and Jai-Hyuk Hwang
International Journal of Control, Automation, and Systems, vol. 3, no. 3, pp.477-485, 2005
Image Sequence Stabilization Scheme Using FIR Filtering
Pyung-Soo Kim
International Journal of Control, Automation, and Systems, vol. 1, no. 4, pp.515-519, 2003
Distance Measurement Using a Single Camera with a Rotating Mirror
Hyongsuk Kim, Chun-Shin Lin, Jaehong Song, and Heesung Chae
International Journal of Control, Automation, and Systems, vol. 3, no. 4, pp.542-551, 2005
Pattern Recognition of Human Grasping Operations Based on EEG
Xiao Dong Zhang and Hyouk Ryeol Choi*
International Journal of Control, Automation, and Systems, vol. 4, no. 5, pp.592-560, 2006
Performance Improvement of IPMC (Ionic Polymer Metal Composites) for a Flapping Actuator
Soon-Gie Lee, Hoon-Cheol Park*, Surya D. Pandita, and Youngtai Yoo
International Journal of Control, Automation, and Systems, vol. 4, no. 6, pp.748-755, 2006
 
 
 .
Business License No.: 220-82-01782